Laser Cutting Forum Users
In the last week, the forum has had an influx of new user registrations. This sounds good, but with it came a bunch of forum SPAM. Upon further investigation, I think there was a new exploit to get around one of the anti-bot security measures I had in place. After (hopefully) patching the hole, I ended up cutting a BUNCH of forum users (not with a laser).
If you are a legit user and find that you lost your account, PLEASE register again. I may have inadvertently cut some real users. I’m very sorry if I accidentally removed your account.
As you may know, the Linkmasta USB device comes inside of a translucent blue box. To accommodate the NGPC cartridge, a rectangular opening is hand cut in the top of the plastic case. There is also an opening for the USB cable that gets hand cut in the side of the case.
Last week, I paid a visit to a company that specializes in plastics to talk about getting these cuts done more professionally. Unfortunately, they said that they couldn’t do both cuts with their laser. However, they should be able to do the top NGPC cartridge socket.
This is not going to be cheap. It will cost me significantly bit more than what I am currently doing. I don’t know if it’s sustainable, due to the costs involved. The main reason I decided to do it for now is just to learn about the process, so I’m chalking the cost up to education. I am having them cut 25 case tops, and I will check out the quality and make a determination if it’s worth it to proceed this way in the future or not.
One think this may mean is that any purchases made in the next week or so may be delayed as I wait for the laser cutting process to be done. I think it will be worth the wait, though. If you want to be first in line to get a bundle with a laser cut case top, head over to the NGPC flash devkit purchase page.